Français
English
- AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 Automatic Compression Testing Machines with Welded Walls for Cubes and Cylinders
- EN 12390-4 Automatic Four Column Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonary Units, Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Four Columns Compression Testing Machines for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Automatic Compression Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
-
AUTOMATIC - GENERAL Compression Testing Machines
- U-Touch PRO Control Unit for Automatic Concrete&Cement Compression/Flexure Testing Machines
- UTEST SOFTWARE for Automatic Concrete&Cement Compression/Flexure Testing Machines
- GENERAL Purpose Automatic Compression Testing Machines for Cubes and Cylinders
- GENERAL Purpose and EN 772-1 Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cubes and Cylinders
- ACCESSORIES for Compression Testing Machines
- SEMI-AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
SEMI-AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders
- EN 772-1 and General Purpose Semi-Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
- SEMI-AUTOMATIC - GENERAL PURPOSE Compression Testing Machines
- MANUAL Compression Testing Machines
- ASTM & AASHTO - Compression Testing Frames
-
EN - Compression Testing Frames
- EN 12390-4 Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
- EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
- EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
-
SEMI-AUTOMATIC Compression and Flexure Testing Machines
- GENERAL - Compression Testing Frames
- ACCESSORIES for Compression Frames
- Hydraulic Power Packs
- FLEXURAL Testing Frames
-
AUTOMATIC & SEMI AUTOMATIC FLEXURAL Testing Machines
- Manual Flexural Testing Machine
- Semi-Automatic Flexural Testing Machine
- Automatic Flexural Testing Machines Rectangle Type
- Automatic Flexural Testing Machine C Type
- Automatic Flexural Testing Machine Four Column Type
- Special C Type Flexural Testing Machines
- Servo Controlled Universal Automatic Bending Test Machine
- Advanced Testing Systems
- ACCESSORIES for Flexural Testing Frames
- Workability & Consistency
-
SCC - Workability & Consistency
- SCC - Sieve Segregation Test Set
- SCC - Slump - Flow Test
- SCC - J-Ring, Narrow Gap, EN
- SCC - J-Ring, ASTM
- SCC - V Funnel
- SCC - L Shape Box Apparatus
- SCC - U Shape Box Apparatus
- SCC - Fill Box Apparatus (Kajima Test)
- Density (Unit Weight) Measure
- Air Contents
- Mass Concrete Temparature Measurement
- Bleeding of Freshly Mixed Concrete
- Setting Time & Consistency Time
- Mixing Concrete in The Laboratory
- Concrete Moulds
- Concrete Compaction
- Concrete Curing
- Grinding
- Capping
- Metal Location in Concrete
-
Non-Destructive Concrete Testing in Structures
- Concrete Test Hammer (Schmidt Hammer) N Type (UTEST)
- Concrete Test Hammer (Schmidt Hammer) N Type
- Ultrasonic Pulse Velocity Tester
- Pundit Lab. Ultrasonic Pulse Velocity Tester
- Complete Set of Crack Width Gauges
- Mechanical Strain Gauge
- Crack Microscope
- Carbonation Test Set
- Measurement of Reinforcement Corrosion Rate
- Digital Bond Strenght /Pull-off Tester
- Digital Rebar Pull-Out Force Tester
- General Properties of U-Touch PRO Control Units
- General Properties of Utest USOFT Softwares
Length Change of Hardened Concrete and Hydraulic-Cement Mortar
Product Code
UTC-1153 | One Gang Shrinkage Mould 75x75x285 mm |
UTC-1155 | Two Gang Shrinkage Mould 75x75x285 mm |
UTC-1161 | One Gang Shrinkage Mould 100x100x285 mm |
UTC-1170 | LargeType Digital Length Comparator |
UTC-1175 | Large Type Length Comparator with Special Heidenhain Readout Unit and Displacement Transducer |
UTCM-0034 | Spare Steel Insert, pack of 12 pieces |
UTCM-0035 | Reference Rod, 295 mm long |
UTCM-0662A | Tamper, Hardwood 13x25x150 mm |
UTC-0410 | Tamping Rod Ø:10x300 mm |
Standards
ASTM-C157, C1105, C151, C227, C311, C341, C342, C441,C452, C490, C531, C596, C806, C878; EN 1367–4, 12617–4, 12808-4; BS 1881:5, 6073
The moulds are used for preparpmg the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened concrete and hydraulic cement mortar .
All moulds surfaces are protected with anti-corrosion oil. Also all parts of the moulds are matchmarked.
The moulds are supplied complied with the steel inserts screwed on.
According to all standardized test methods for determinig the length changes under different conditions, the muolds are used together with the any UTEST Length Comparators (UTC-1170 and UTC-1175) fits the specimens sizes.
UTC-1170 and UTC-1175 LargeType Digital Length Comparators can be used cement/concrete prisms up to 100mm width Adjustable beam height (except dial ggauge) is 365mm and 220mm horizontal clearance). UTC-1170 Consists of a 12.7x0.001 mm graduated digital dial gauge which is mounted on a steel frame.
Reference rod and other equipment be should ordered separately.
UTC-1155 UTC-1153 UTC-1161
Product Code | UTC-1153 | UTC-1155 | UTC-1161 | UTC-1170 | UTC-1175 |
|---|---|---|---|---|---|
Dimensions | 100x90x340 mm | 190x90x340 mm | 250x120x340 mm | 285x285x450 mm | 285x285x610 mm |
Weight (approx.) | 7 kg | 12 kg | 18 kg | 15 kg | 6 kg |
